ASTM D 3475 Prevent Children from Opening

Product introduction： ASTM D 3475-1995（2003）（Classification of Child-Resistant Packages）The United States was the earliest country to conduct research on child safety packaging and develop testing methods and standards, and its standards and regulations for child safety packaging are relatively rich and complete. In the American Society for Testing and Materials (AST M) standard catalog, there are a total of 9 standards related to child safety packaging, which provide specific requirements for some child safety packaging rules, mainly focusing on the classification methods of child safety packaging and the opening and testing methods of child safety packaging.Among them, ASTM D 3475-1995 (2003) 'Classification of Child Resilient Packages' classifies children's safety packaging products. The compression type child safety cover is a common packaging form in the market for child safety packaging. In the ASTM D 3475-1995 standard, this packaging cover belongs to the IA type child safety cover.The pressure spinning type child safety cover is generally a two piece laminated cover with an inner core made of polypropylene injection molding and an outer cover made of polyethylene injection molding. The structural diagram is shown in Figure 1. When opening, the outer and inner covers must be tightly pressed, so that the tongue inside the outer cover presses against the protrusion at the end of the inner cover, and the teeth fit together while rotating. Otherwise, there will be only a clicking sound that cannot be opened. When tightening this cap, only fit the bottle mouth as usual and tighten it. Due to the different opening method of this cap from ordinary bottle caps, it can prevent children from opening and accidentally taking it, and has a safety protection effect on the use of drugs. At present, some companies in the market are promoting the use of pressure spinning caps in the packaging of more products, as shown in Figure 2, from pharmaceutical packaging to the packaging of household chemicals such as bleach, and from tablet packaging to liquid packaging.Relevant testing standardsGB/T 17876、BB/T 0025、BB/T 0034(GB/T 14803)、 ASTM D 2063、ASTM D 3198、ASTM D 3474、YBB00052005-2015、YBB00092002-2015、YBB00392003-2015、YBB00112002-2015Contact number: 4006-288-211，0755-27454498

Project introduction： There are clear requirements for child proof packaging testing exported to the United States, mainly including the first part of ASTM-D3475 standard testing and the second part of CPSC testing. According to the customer's requirements for the product, only one type of testing can be conducted, or ASTM-D3475 can be tested together with CPSC

Application description：

Expected cycle： 3-4 weeks

Latest offers：

Project description
Customer case
Certification application

ASTM D 3475-1995（2003）

（Classification of Child-Resistant Packages）

The United States was the earliest country to conduct research on child safety packaging and develop testing methods and standards, and its standards and regulations for child safety packaging are relatively rich and complete. In the American Society for Testing and Materials (AST M) standard catalog, there are a total of 9 standards related to child safety packaging, which provide specific requirements for some child safety packaging rules, mainly focusing on the classification methods of child safety packaging and the opening and testing methods of child safety packaging.

Among them, ASTM D 3475-1995 (2003) 'Classification of Child Resilient Packages' classifies children's safety packaging products. The compression type child safety cover is a common packaging form in the market for child safety packaging. In the ASTM D 3475-1995 standard, this packaging cover belongs to the IA type child safety cover.

The pressure spinning type child safety cover is generally a two piece laminated cover with an inner core made of polypropylene injection molding and an outer cover made of polyethylene injection molding. The structural diagram is shown in Figure 1. When opening, the outer and inner covers must be tightly pressed, so that the tongue inside the outer cover presses against the protrusion at the end of the inner cover, and the teeth fit together while rotating. Otherwise, there will be only a clicking sound that cannot be opened. When tightening this cap, only fit the bottle mouth as usual and tighten it. Due to the different opening method of this cap from ordinary bottle caps, it can prevent children from opening and accidentally taking it, and has a safety protection effect on the use of drugs. At present, some companies in the market are promoting the use of pressure spinning caps in the packaging of more products, as shown in Figure 2, from pharmaceutical packaging to the packaging of household chemicals such as bleach, and from tablet packaging to liquid packaging.

防止儿童打开

Relevant testing standards

GB/T 17876、BB/T 0025、BB/T 0034(GB/T 14803)、 ASTM D 2063、ASTM D 3198、ASTM D 3474、YBB00052005-2015、YBB00092002-2015、YBB00392003-2015、YBB00112002-2015

Contact number: 4006-288-211，0755-27454498

Hot Products / Popular search： More

CE Certification

2018 - 02 - 28

1. Introduction to CE certificationThe 'CE' mark is a safety certification mark that is considered a passport for manufacturers to open and enter the European market. CE represents the logo of the European Unified CE Certification (CONFORMITE EUROPEENNE). All products with the 'CE' mark can be sold in various member states of the European Union without meeting the requirements of e...

EU Certification

2018 - 01 - 30

European UnionCE certification, EU ERP certification, EU REACH certification, EU RoHS certification, EU ENEC certificationGermanyTUV South German certification, German WEEE certification, German GS certificationBritainUK BSI Certification UK UKCA CertificationFranceFrench NF certificationNordic CountriesNordic Nordic CertificationNetherlandsKEMA certification in the NetherlandsAustriaAustria OVE c...

American ASTM

2017 - 06 - 09

Summary of Certification ContentThe predecessor of ASTM was the International Association for Testing Materials (IATM).In the 1880s, in order to resolve the opinions and disagreements between buyers and suppliers in the process of purchasing and selling industrial materials, some proposed the establishment of a technical committee system. The technical committee organized representatives from vari...

IEC certification

2017 - 06 - 09

Introduction to IEC CertificationThe IEC standard, also known as the International Electrical Commission, is a worldwide standardization organization composed of various countries' electrical committees. Its purpose is to promote standardization in the field of electrical and electronic technology worldwide. The origin of the International Electrotechnical Commission was a resolution passed at...